I have acquired an Air Command project to finish the build on. It is a non center line thrust model. The mast is 72" with 2 1×2s and the keel extends 60" to the rear.

It came with an Arctic Cat 600cc liquid cooled fuel injected 2 stroke motor that is rated at 118 hp at 7k rpm. I have a 2.62 belt reduction drive from J-bird that mounts below the engine. I may need to mount it upside down for prop clearance. I may purchase the OEM digital engine monitor that was on the Snowmobile.

My current plan is to use my 3 blade Bolly prop hub. I plan to mount the redrive high enough for a 64" prop.

It has the original flying tail. I am planning to use a Tangogyro tail and Rotors and a Wunderlich pre rotator.